Vacuum Cleaner Rating

Eureka Vacuum Bag Installation

If you have a Eureka Vacuum Bag style vacuum cleaner, it is very important that you know how to install and reinstall a new bag. Generally, you will find how to install a Eureka vacuum bag by checking out the Eureka vacuum Owner's Guide that will come with your Eureka Vacuum Bag style vacuum cleaner.

If you have lost your vacuum cleaner Owner's Guide, you can usually go to the official Eureka vacuum website and download the PDF version of the vacuum guide.

Sometimes, you will find basic instructions for changing your Eureka vacuum bag on the package of the replacement bags.

For the Eureka RR Filteraire vacuum cleaner, you can following the following instructions to properly installing and changing your Eureka vacuum bag.

First, before installing your Eureka vacuum bag, you want to make sure to turn off the switch and unplug the cord from the wall. You do not want to operate a vacuum without the bag or the filter properly installed.

Next, you want to release the front latch cover and pull the pivot bag cover away from the vacuum cleaner and remove it. (Now remember these instructions are for the RR Filteraire vacuum cleaner, so the removal and installation instructions for your Eureka vacuum bag may be slightly different.).

Now, you want to pull and hold the lever to the left, away from the Eureka vacuum bag, pull the cardboard bag's collar and the pivot collar down until it snaps loose, and remove the Eureka vacuum bag from the vacuum and throw it away.

To install a new Eureka vacuum bag into your RR Filteraire vacuum cleaner, you want to use a 61115 Eureka vacuum bag as a replacement bag.

If the Eureka vacuum bag is not properly installed, the bag cover will not shut, so you want to make sure that you carefully install the Eureka vacuum bag.

To replace the Eureka vacuum bag, you want to locate the back ledge and put the bag collar on the ledge of the vacuum. Push with both of your thumbs until the Eureka vacuum bag secures on each side.

You want to check to make sure that the paper bag collar is secured to the hose adapter inside the paper bag collar. Tuck the bag into the bottom and along the sides of the back ledge.

Then place the lower part of the front cover into the cleaner slot and close the vacuum cover. Make sure that when you close the cover, the Eureka vacuum bag is not caught under the front cover.

Remember that these instructions will be similar for most Eureka vacuum bag style vacuum cleaners, but they will vary slightly. Make sure that you use the proper replacement bag.